To create a CNC program, it
is necessary to define the exact position of
the workpiece when setting it up
on the machine table. In PASCAM Bea, after
the first clamping, the component can be
re-clamped in the machine as often as
required.
|
|
|
|
In practice, wood-based materials
occasionally have deviations from their nominal
dimensions. For precise manufacturing, it is
necessary to take these dimensional tolerances
into account. PASCAM Bea provides the definition
of measurements in all
directions of the workpieces and indicates the
details of the effect of those dimensional
deviations on the machining operations.
|
|
In order for the machine or the
machine operator to determine the correct
position of the clamping elements, certain areas
can be defined to be blocked on the workpiece
where clamping devices are prohibited to be
used. These blocked areas can
be specified manually by the designer of the
production model or determined automatically by
PASCAM Bea.
|
|
|
|
For many applications, it is
useful to determine the exact outside
contour of the workpiece for setup.
This can be done manually or automatically in
PASCAM Bea.
|
|